ALTOSONIC III

  • Excellent long-term stability and high reliabilty
  • Eliminates maintenance
  • Non-intrusive, no moving parts; no pressure loss, no wear
  • Compliant with OIML R-117 and API

  • Cost effective alternative for conventional flowmeters like turbines or PD meters
  • Large dynamic range
  • Light weight and compact to build-in
  • Bi-directional flow measurement
  • Easy integration with any approved (existing) flow computer
  • Integrated diagnostics

  • Refined product pipeline measurement
  • Rail wagon and truck loading
  • Terminal on- and off-loading
  • Pipeline leak detection
  • Custody transfer
  • Fiscal metering
  • Duty metering
  • Allocation metering

  • Oil & Gas
  • Refineries
  • Petrochemical

ALTOSONIC 5

  • Suitable for all flow regimes, no Reynolds limitation
  • Integrated gas detection
  • Significantly easier to be proved using small volume provers
  • The ALTOSONIC product line for fluids has established itself as the standard in multi-beam custody transfer flow metering.

 

  • All fluids and no Reynolds restriction – Widest certified turndown – Guaranteed performance in all flow regimes (laminar, transition and turbulent) – Bi-directional flow measurement
  • Proven long-term stability – No moving parts – Longest installed base (1996 – present) – No unscheduled downtime due to transducer failure since introduction
  • Small footprint – Short inlet run – Short installation height
  • Entrained gas detection (Full Pipe Guarantee) – Dedicated diagnostic path – Permanent diagnostics
  • Compact prover compliance (SVP)

  • Oil and gas
  • Petrochemical
  • Chemical

  • Offshore & Onshore oil production
  • Crude oil pipelines
  • Multi-product pipelines
  • Loading and off-loading terminals (crudes, refined products and LNG)
  • Refineries

DK 34/37/32

The solution for all metal flowmeters

DK- all metal flowmeters are suitable for measuring the volumetric or mass flow rate of liquids, gases and vapors. Thanks to the rugged design, the flowmeters are especially suitable for difficult operating and environmental conditions.

Highlights:

  • DK32 with horizontal connections – with valve.
  •  DK34 with vertical connections – without valve.
  •  DK37 with high degree of measuring accuracy and large display.
  •  DK37 with vertical connections – without valve.
  •  Slim design allows hight packing density.
  •  Simple Installation & start-up.
  •  Corrosion resistant.
  •  Low maintenance.

  • Low cost.
  • Easy to install.
  • Flow measurement is possible in all directions.
  • Relatively low maintenance required.
  • Can be used for both gas and liquid applications.
  • Accuracy is of 1.6 class (approximately 1.6% to 2% of the measured value).
  • Reliable and trouble free operation.
  • Turndown is of 10:1.
  • Irrespective of size the length is 250mm as standard.
  • It can handle viscous liquids upto maximum 250cP.
  • We can supply VA meter with temperature range of -80 to 200 degree Celsius other ranges on request.


DK 32/34

  • Simple and low-cost measuring principle without auxiliary power
  • Materials in contact with the medium: Stainless steel, optional: Hastelloy, Monel, titanium
  • Process temperatures from -80°C to +150°C
  • Operating pressure up to 130 bar
  • Upper limit of measurement for liquids: 1.6 to 160 l/h (water: 20°C)
  • Upper limit of measurement for gases: 16 to 4,800 l/h (air: 20°C, 1.013 bar)
  • 2 limit switches
  • Accuracy 4.0 % of measured value acc. VDI/VDE 3513-2 (qG=50%)
  • Approved for hazardous areas in accordance with ATEX, FM, NEPSI
  • Ingress protection IP66/68 (IP65 with limit switches)
  • Many different process connections

DK 37

•    Materials coming into contact with the medium: Stainless steel, optional: Hastelloy, Monel, titanium
•    Process temperatures: -80 to +150°C (-25 to +135°C for el. indicator)
•    Operating pressure up to 130 bar
•    Upper limit of measurement for liquids: 1.6 to 160 l/h (water: 20°C)
•    Upper limit of measurement for gases: 16 to 4,800 l/h (air: 20°C, 1.013 bar)
•    2 limit switches or mA analog output
•    Accuracy 2.5 % of measured value acc. VDI/VDE 3513-2 (qG=50%)
•    Approved for hazardous areas in accordance with ATEX, and NEPSI
•    Ingress protection IP66
•    Many different process connections

• Fine metering.
• Gas chromatography.
• Minimum level monitoring and control.
• In connection with a differential pressure regulator: Ensures constant flow rate in the case of inlet or outlet pressures.
• Mainly use for purging applications in different processes.

H250 M9

The H 250 M 9 flowmeter for liquids and gases is an all-metal flowmeter which operates on the float principle. Depending on the flowrate, the float will assume a certain vertical position in the tube. The float position is transmitted by a magnetic coupling system to the scale. The flowmeter is designed for installation in a vertical pipe run with flow from bottom to top. The rugged construction of the H 250 variablearea flowmeter makes it particularly suitable for difficult application and environmental conditions. The H 250 flowmeter can be equipped with the M9 indicator.

In the M9 indicator the rotational movement of the follower magnet system is transmitted to the indicator without being linearized and the flowrate value is indicated directly on the scale.

M9 indicator :

  • Simple, low-cost installation: Measure and display without auxiliary power supply
  • Large scale for good readability
  • Modular and flexible to adapt to customer-specific applications
  • – 2 limit switches (NAMUR or 3-wire transistor)
  • – 2-wire analog output 4…20mA with HART – Profibus PA interface
  • – 6-digit flow counter with pulse output (non Ex)
  • Optional stainless steel housing for corrosive atmospheres


H250 measuring cone :

  • Sturdy stainless steel construction for high operating pressure up to 3000 bar and extreme process temperatures from -200°C to +300°C
  • Optionally available with PTFE/ceramic liner for acids and alkalis
  • High application security, even with extremely small flows
  • Excellent long-term stability
  • Upper limit of measurement for liquids: 10 to 120,000 l/h (water: 20°C)
  • Upper limit of measurement for gases: 0.7 to 2800 m3/h (air: 20°C, 1.013 bar)
  • Accuracy 1.6 % of measured value acc. VDI/VDE 3513-2 (qG=50%)


• Continuous gas and liquid measurement
• Measurement of non-conductive media
• Industrial combustion control
• Compressor monitoring
• Dry-run protection of pumps

OPTISWIRL 4200

  • Integrated pressure and temperature compensation
  • Development acc. to IEC 61508 edition 2, for SIL2
  • Gross and net heat measurement for hot water and steam
  • Comprehensive communication options
  • Remote version with field housing converter with connection cable up to 50 m / 164 ft

 

  • Development acc. to IEC 61508 edition 2
  • Advanced technology for signal filtering – AVFD (Advanced Vortex Frequency Detection)
  • Integrated pressure and temperature compensation
  • Temperature compensation for saturated steam included as standard
  • Integrated gross and net heat calculation for steam and hot water
  • Comprehensive communication options
  • Field mounted version with cable length up to 50 m / 164 ft
  • Integrated reduction of nominal size
  • Measurement of conductive and non-conductive liquids, gases and steam

 

  • Measurement of saturated steam and superheated steam
  • Steam boiler monitoring
  • Heat metering of steam and hot water
  • Measurement of consumption of industrial gases
  • Measurement of consumption in compressed air systems
  • Monitoring of compressor output
  • Evaluation of Free Air Delivery (FAD)
  • SIP and CIP processes in the food, beverage and pharmaceutical industries
  • Safety-related measurement in SIL applications (SIL2)

  • Chemicals
  • Oil & Gas
  • Power plants
  • Food & Beverage
  • Pharmaceuticals
  • Iron, Steel and Metals
  • Paper & Pulp
  • Water
  • Automobile industry

Optiswirl 4070

The all-in-one solution

The OPTISWIRL 4070C is the only vortex flowmeter with integrated pressure & temperature compensation in 2-wire technology. The OPTISWIRL 4070C provides reliable measurement of operating, standard, volumetric and mass flow of conductive & non – conductive liquids, gases and vapours, even with fluctuating pressures and temperatures.

Highlights:

  •  2-wire device with integrated pressure and temperature compensation.
  •  Non -wearing, fully welded stainless steel construction with high corrosion, pressure and temperature resistance.
  •  Optimal process reliability thanks to Intelligent Signal Processing (ISP) – stable readings, free of external perturbations.
  •  Ready to use immediately thanks to plug & play.
  •  Maintenance free sensor design.
  •  PACTware available at no extra cost.
  •  Pressure & Temperature can be called up via HART.


  • Fully welded bluff body
    No problems with pressure shocks

  • Sensor in the shadow of the bluff body

  • Extremely low mechanical stress on the pick up

  • No damage to the pick up due to passing solid contents

  • No possibility of deposits on the pick up

  • Only two sizes of sensor pickups for the entire range of VFM sizes

  • 2-wire instrument with integrated pressure- and temperature-
    compensation
  • Fully welded st. steel construction with high corrosion-,
    pressure- and temperature resistance
  • Highest application reliability due to the Flodoc Intelligent Signal Processing

Stable measuring results

  • Maintenance free construction of the sensor
  • Possible to change the pressure sensor under process conditions.

  • Isolate the Pressure sensor for leakage and pressure tests
  • Self venting valve which can only be operated with a tool


Industries

•    Chemicals
•    Oil & Gas
•    Power plants
•    Food & Beverage
•    Pharmaceuticals
•    Iron, Steel and Metals
•    Paper and pulp
•    Water
•    Automobile industry

Applications

•    Vapour and saturated steam measurement
•    Steam boiler monitoring
•    Monitoring of compressor output
•    Measurement of consumption in compressed air systems
•    Measurement of consumption of industrial gases
•    SIP and CIP processes in the food, beverage and pharmaceutical industries
•    Measurement of conductive and non-conductive liquids

Aquamag

AQUAMAG:-Electromagnetic Flowmeter.
Primary Head for Water and Waste Water Measurements

Highlights:

  • Reliable expert for water and wastewater measurement.
  • Wafer design.
  • Easy ,quick and low cost of installation.
  • Hard rubber liner.
  • Rugged and proven design.
  • Absolutely maintenance free.


 

  • No moving parts inside:

    • Nothing can be caught!

  • Same diameter as mating pipe:
    • No additional pressure drop!

    • Ideal for hydrostatic transport!

  • No moving parts:

    • No wear no tear:

    • High reliability!

  • Thanks to the liner we achieve
    • High chemical resistance:

    • Long lifetime even with aggressive and abrasive liquids
  • Also well proven for the

    • Measurement of sludges, slurries

    • Dosing of flocculents and other additives
  • KROHNE magmeter in the water & waste water industry
  • More than 40 years experience!
  • The magnetic field is present throughout the flowmeter.
    • Each flow string is within the magnetic field.
    • Each flow string generates with its indi- vidual velocity gives a share Es to the signal voltage E.
  • Result:

    • Excellent averaging of the flow profile allover the complete pipe section.
    • Reduced effect of the velocity profile onto the measuring accuracy !
    • Short upstream straight section required!
  • Good accuracy also when confronted with unfavourable installation conditions.
  • No point or single beam measurement = never a one point measurement can represent the total flow in a pipe.
  • Wet calibration = function control and correction factor.



Ecomag

ECOMAG:-Electromagnetic Flowmeter

Flowmeter to measure the volumetric flow rate of electrically conductive liquids. It has Smooth inner tube and  no pressure loss.

Highlights:

  • Reliable expert for all industrial applications and measurement for process liquids.
  • Wafer design.
  • Easy,quick and low cost of installation.
  • PTFE Liner.
  • Rugged and proven design.
  • Absolutely maintenance free.

  • No moving parts inside:

    • Nothing can be caught!

  • Same diameter as mating pipe:

    • No additional pressure drop!

    • Ideal for hydrostatic transport!

  • No moving parts:

    • No wear no tear:

    • High reliability!

  • Thanks to the liner we achieve

    • High chemical resistance:

    • Long lifetime even with aggressive and abrasive liquids

  • Also well proven for the

    • Measurement of sludges, slurries

    • Dosing of flocculents and other additives

  • KROHNE magmeter in the water & waste water industry

  • More than 40 years experience!

  • The magnetic field is present throughout the flowmeter.

    • Each flow string is within the magnetic field.

    • Each flow string generates with its individual velocity gives a share Es to the signal voltage E.

  • Result:

    • Excellent avaraging of the flow profile allover the complete pipe section.

    • Reduced effect of the velocity profile onto the measuring accuracy !

    • Short upstream straight section required!

  • Good accuracy also when confronted with unfavourable installation conditions.

  • No point or single beam measurement = never a one point measurement can represent the total flow in a pipe.

  •  Wet calibration = function control and correction factor.


  • Suitable for all industrial chemicals.
  • Process liquids.
  • Effluent treatment plants.


GEMSCAB Cable Sizes for Motors

list

1.1 KV Four Core PVC Insulated Cable

four-core